Acrylic Overlays

Acrylic CoatingsDecorative and protective, these coatings will enhance your home or business as well as protect the concrete under them. Our tough acrylic-cement coatings are made to stay in place and add value and beauty.

Acid StainsAcid Stains

Natural. Vivd, rich colors. Concrete acid staining is a cost-effective, beautiful way to finish any concrete surface.

Interiors Interior Overlays

Concrete is not for outdoor environment alone! Our decorative coatings can be applied over a variety of substrates. Click on our galleries to see all the possibilities.

On Facebook For the latest visit Our Facebook Page

Home Maintenance Tips

QUICK TIPS TO MAINTAIN YOUR CONCRETE OVERLAY SYSTEM

  • Regular, periodic cleaning is the best overall assurance of a long life for your acrylic cementfinish and will keep it looking new. Soap (laundry detergent, dish soap, etc) and water will clean 90% of all stains. The higher the pressure, the better. Citrus degreasers can be used on heavy oil stains. Stains left for long periods of time may require high pressure washing by Woolsey Construction Services or a qualified professional. (Note: Fuel and asphalt oils can become almost impossible to remove, even with high pressure if not removed in a reasonable period of time, so clean it regularly.)

  • NEVER use any solvent-based cleaners. DO NOT USE SOLVENTS SUCH AS ACETONE, LAQUER THINNER, OR THE LIKE. Read label contents thoroughly.

  • White vinegar and water is the best solution for cleaning hard water and rust stains. CLR cleaner works great for stubborn rust stains. (Chlorine, Lime & Rust Remover, available in most grocery and hardware stores) Tough rust stains can be removed with light muriatic acid / water solution.(Scrub and rinse thoroughly)

  • Be careful not to scar the surface with sharp objects. Avoid dragging of heavy metal objects such as furniture.

  • Have your surface resealed every 2-3 years. This ensures that the surface remains non-porous.

  • Most snow-blowers will not harm the finish, but exercise caution and use a plastic snow shovel in the winter. (Salt and ice melters will not harm the finish in any way, in fact use regular rock salt instead of expensive ice melters!)

  • Fertilizer should be removed immediately after application. Most fertilizers contain iron oxide, which will cause rust stains that are very difficult to remove once they have dried. Blow off all pellets, and wash the surface thoroughly after application for best results.

For stubborn stains or questions about cleaners or cleaning methods, contact us today. We will be happy to answer all your questions

1215 Shriver Road • PO Box 126 • Orofino, Idaho 83544 | Phone: 208-476-5500 • Fax: 208-874-4332